Hardware woes

When I put the SECD project aside, it was because I could not get the RAM controller to run. I felt rather stupid, as the RAM is a very simple asynchronous chip that requires no special timing, yet all my attempts to reliably write the RAM from the 6809 host failed - And as long as that does not work, I can't start any program on the SECD coprocessor. Today I finally found the source of my problems. It appears that even though there is an address bit ram_a(0) in the constraints file for the Trenz retrocomputing base board, it is not connected to the RAM. Supposedly, it is not connected because the RAM works word-wise. It took writing a standalone RAM tester in VHDL and a lot of staring at the logic analyzer and Chipscope outputs to find out that I actually had an addressing problem. Also, John Kent was of great help again as he assured me that, prinicipially, the VHDL that accesses the RAM looks right. He also suggested that I might have a problem related to my constraints file, which appeared to be true. Now, finally, I can turn to actually getting the LispKit compiler to work and see the fixed hardware garbage collection in action. Stay tuned.